
XDSR280HDMI, Xcruiser Digital Satellite Receiver
|
Tuner & Channel Decoder |
|
|
Input Connector Loop through out Frequency Range Input Impedance Signal Level LNB Power 22KHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC Decoder |
F-type, IEC 169-24, Female F-type, IEC 169-24, Female 950MHz ~ 2150MHz 75Ω, unbalanced -65 to -25dBm 13/18VDC, max.400mA (22±2)KHz, (0.6±0.2)V V1.0/1.2/USALS Compatible QPSK 2 ~ 45 Ms/s 1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7 |
|
MPEG Transport Stream A/V Decoding |
|
|
Transport Stream Profile Level Input Rate Video Formats Video Resolution Audio Decoding Audio Mode Sampling Rate |
MPEG-II ISO/IEC 13818 MPEG-II MP @ ML Max. 15Mbit/s 4:3 LetterBox, 4:3 PanScan, 16:9 720 x 576, 720 x 480 MPEG/MusiCam Layer Ⅰ&Ⅱ Streo/Joint stereo/Mono 32KHz, 44.1KHz and 48KHz |
|
Main System |
|
|
Main Processor Memory |
NXP Virgo Ultra Flash-ROM : 2 MBytes SDRAM : 32 MBytes |
|
Audio / Video & Data IN/OUT |
|
|
HDMI RCA S/PDIF RS-232C USB |
576i Only CVBS Video, Audio L, R Output Digital Audio Output(Coaxial) 9 pin D-SUB (Male) type, Transfer rate 115Kbps USB 2.0 Host Support |
|
RF Modulator |
|
|
RF Connector Frequency Output Channel TV Standard Preset Channel |
75Ω, IEC 169-2, Male/Female 470 ~ 860MHz CH 21 ~ 69 for the Remodulator PAL G/I/K Selectable by Menu CH 36 (or TBD) Software changeable by Menu |
|
Front Panel |
|
|
Slot Buttons Display Indicators |
1 USB 2.0 Host Slot 1 Smart Cart Slot 3 Buttons(Standby, CH UP/DOWN) 7 Seg. 2 LEDs(Standby, Remote ) |
|
Power Supply |
|
|
Input Voltage Type Power Consumption Standby Power Protection |
AC 100 ~ 250V, 50/60Hz SMPS Max. 25W Max. 8W Separate Internal Fuse & Lighting protection |
|
Physical Specification |
|
|
Size (W x H x D) Weight (Net) Operating Temp. Storage Temp. |
260mm X 55mm X 210mm 1.2 Kg 0°C ~ +45°C -10°C ~ +70°C |
Download User Manual: |
English